Sharp GP2Y1010AU0F Compact optical Dust Sensor

Model No: SEN-00076

TK. 1485.51

Availability: In stock

Quantity:

0 Ratings / 0 Reviews

Category: Other Sensor

Supplier: DFRobot

The Sharp Optical Dust Sensor (GP2Y1010AU0F) is especially effective in detecting very fine particles like cigarette smoke, and is commonly used in air purifier systems.

An infrared emitting diode and a phototransistor are diagonally arranged into this device, to allow it to detect the reflected light of dust in air.

The sensor has a very low current consumption (20mA max, 11mA typical), and can be powered with up to 7VDC. The output of the sensor is an analog voltage proportional to the measured dust density, with a sensitivity of 0.5V/0.1mg/m3.

For your convenience, DFRobot ship this sensor with a 6-pin, 1.5mm pitch mating connector and cable. A 150ohm resistor and a 220uF capacitor are required to link this sensor with Arduino.

A special adapter is developed by DFRobot to help connecting it to our expansion shield.

Click here to know more about this product.