• শুরু হয়েছে বিজয়ের মাস ডিসেম্বর। আর এই বিজয়কে উপলক্ষ্য করে সারা মাস জুড়ে টেকশপবিডিতে থাকবে ডিসকাউন্ট এর সমাহারডিসেম্বর মাসের এক এক দিন এক এক ধরনের প্রোডাক্টে থাকবে আকর্ষণীয় ডিসকাউন্ট। আর প্রতিদিন ভিন্ন ভিন্ন সময়ে খুব অল্প সময়ের জন্য যেকোনো একটি প্রোডাক্টে দেয়া হবে ৪০%-৮০% ডিসকাউন্টআপনার পছন্দের প্রোডাক্টটি তাই স্বল্পমূল্যে লুফে নিতে ভিজিট করুনঃ https://www.techshopbd.com/special-offers

Items: 0 Amount: BDT 0 in cart Checkout now!
Search

CC Debugger

Model : PRG-00011

Brand : Waveshare Electronics

Supplier : Waveshare Electronics, China

TechshopBD, Bangladesh

Pricing
Quantity
Price

1 - 9
BDT1880.38

10 - 99
BDT1858.76Save BDT 21.62

100 +
BDT1850.11Save BDT 30.27

Yellow 5 Available Only

You may also be interested in

 
Summary:
Debugger and Programmer for CCxxxx RF System-on-Chip (SoC) devices, CCxxxx RF transceivers, and CC85xx devices.

The CC Debugger is primarily used for debugging and programming the flash on CCxxxx 8051-based System-on-Chip (SoC) devices from Texas Instruments. CC Debugger also supports CCxxxx RF transceivers. In addition, CC Debugger is used for configuring the CC85xx devices with PurePath Wireless Configurator.


Key Features

  • Performance
    • Compatible with the original TI CC Debugger
    • Supported Operating Systems: Windows 2000, Windows xp sp2/sp3, Windows Vista 32bit, Windows 7 32bit
    • Target voltage: 1.2V~3.6V
    • Capable of powering the target board from the debugger
    • Operating temperature: 0℃~85℃
  • Supported Software
    • IAR Embedded Workbench For C8051
    • SmartRF Flash Programmer
    • SmartRF Studio
    • SmartRF Packet Sniffer
    • PurePath Wireless Configurator
  • Connects to PC
    • Computer connection via USB interface
  • Connects to target board
    • Target board connection via 10-pin IDC connector (2x5 2.54mm pitch). The figure below shows the header pinout:CC Debugger header pinout

Supported Devices

  • Programming and debugging the following 8051-based system-on-chips from Texas Instruments:
    • CC1110, CC1111
    • CC2430, CC2431
    • CC2510, CC2511
    • CC2530, CC2531, CC2533
    • CC2540, CC2541
    • CC2543, CC2544, CC2545
  • Controlling the following transceivers from SmartRF Studio:
    • CC1120, CC1121, CC1125, CC1175
    • CC1101, CC110L, CC113L, CC115L
    • CC2520
  • Configuring the CC85xx devices with PurePath Wireless Configurator:
    • CC8520, CC8521
    • CC8530, CC8531

LED Status

  • OFF: The debugger has no power or there is no valid firmware on the debugger.
  • AMBER (BOTH LEDS ON): The debugger is powered, but there is no valid firmware.
  • RED LED BLINKING: The Debugger is in Boot Recovery Mode.
  • RED LED ON: No device detected. This might be due to old firmware on the CC Debugger, or a problem with the hardware connection (make sure the target board is properly powered and connected correctly).
  • GREEN LED ON: The target device has been properly detected. It is possible to start programming/debugging.

Package Contains

  1. CC Debugger × 1
  2. USB cable × 1
  3. 10-pin flat cable × 1

 

Click here to know more about this product.

Login to post comments.


Copyright © 2012-13 Techshop Bangladesh. All rights reserved.