USB Power Module

Model : MOD-00155

Supplier : Techshop Bangladesh

TechshopBD, Bangladesh


1 - 9

10 - 99
BDT310.26Save BDT 9.76

100 +
BDT306.36Save BDT 13.66

Yellow 7 Available Only

You may also be interested in

USB Power Module

This module, based on LM2576 5V regulator, lets you provide power to 5V USB devices from a wide range of power sources. Use it to power up your raspberry pi and similar usb powered devices and fast charge your cell phones & power banks, using Lipo batteries, power adapters or similar dc power supplies.

Power Inputs: There’re 3 options to apply input voltage: one xt-60 lipo battery connector, a barrel connector for power adapters (center positive) and a terminal block connector (alternative input). Note that there’s no reverse polarity protection. And be careful to use only one of them at a time to supply input voltage.

Power Outputs:
Three USB-A ports as well as a three pin output power rail to supply clean voltage of 5V to any device of your choice

  • Max output current (all usb ports & power rails combined): 2.5A. It’s recommended not to exceed 2A continuous current.
  • Output Voltage: 4.99V (0-500mA output current), 4.8V (2A output current).
  • Input Voltage: 7V-35V DC.
  • Input connectors: XT-60, barrel connector, 2 pin terminal block.
  • Output connectors: 3 USB-A ports, two separate rails for 5V and GND.
  • Enable switch: to enable/disable the LM2576 IC.
Login to post comments.

Copyright © 2012-13 Techshop Bangladesh. All rights reserved.