Search

Arduino Ethernet Shield W5100 (China)

Model : ARD-00042

Supplier : Made in China

TechshopBD, Bangladesh

Pricing
Quantity
Price

1 - 9
BDT595.95

10 - 99
BDT584.39Save BDT 11.56

100 +
BDT579.74Save BDT 16.21

Green 33 Available

You may also be interested in

 
Summary:
Arduino compatible ethernet shield.

W5100 Ethernet Shield is an Arduino  compatible ethernet shiled based on W5100 ethernet module. It has an in built slot for Micro SD card.

This Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W5100 ethernet chip. The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP. It supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield.

The ethernet shield connects to an Arduino board using long wire-wrap headers which extend through the shield. This keeps the pin layout intact and allows another shield to be stacked on top.

Arduino uses digital pins 10, 11, 12, and 13 (SPI) to communicate with the W5100 on the ethernet shield. These pins cannot be used for general i/o.

The shield provides a standard RJ45 ethernet jack.

The reset button on the shield resets both the W5100 and the Arduino board

The shield contains a number of informational LEDs:

  • PWR: indicates that the board and shield are powered
  • LINK: indicates the presence of a network link and flashes when the shield transmits or receives data
  • FULLD: indicates that the network connection is full duplex
  • 100M: indicates the presence of a 100 Mb/s network connection (as opposed to 10 Mb/s)
  • RX: flashes when the shield receives data
  • TX: flashes when the shield sends data
  • COLL: flashes when network collisions are detected
Login to post comments.
anon
Akhter | Nov 2,2014 at 05:42 AM
Can I use It direct with relay
anon
A.R | Nov 2,2014 at 11:13 AM
You can connect the switching pin of a relay with the shield's I/O pin. But to control (on/off) a load with ac, you need relay shield/module.
anon
A.R | Nov 2,2014 at 10:50 AM
You can connect the switching pin of a relay with the shield's I/O pin. But to control (on/off) a load with ac, you need relay shield/module.
anon
Ananto_alive | Nov 14,2014 at 12:53 PM
The ss pin is located in Digital pin 4 for SD card. Please mention this in the Description clearly to avoid confusions.
anon
Bdatanu | Feb 2,2015 at 10:43 PM
What is the MAC address of the schield. Bought one but can not connect to the internet.
anon
Ferdaus | Feb 8,2015 at 02:55 PM
You can you the following address: mac[] = {
0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED };

particularly this Ethernet shield doesn't have any mac address. This product needs to be registered for mac address to mac giving companies. There are several Ethernet chips on the market . You can work with them with the above mentioned MAC. but while you will use them commercially you will have to register the IC for the permanent dedicated mac address.
anon
Ferdaus | Feb 8,2015 at 03:01 PM
Original Ardunio Ethernet shield has dedicated mac address. You can use that one.
anon
Shahad | Apr 10,2015 at 01:58 AM
how long before this is back in stock?
anon
Isti_pb | May 5,2015 at 12:37 PM
When will it be available again?
anon
Borhanreo | Nov 8,2015 at 09:15 PM
have any tutorial (code) for arduino
anon
Shajibeng | Feb 18,2016 at 10:13 AM
I brought a Arduino uno. i want to buy a ethernet shielf and I want to controll light, fan and other load with using internet. how it possible? give me details pls.
anon
A.R | Feb 18,2016 at 10:42 AM
We do not provide codes, designs etc. That is totally the customer's concern. However, it's possible to control loads through the internet using ethernet shield . You will find may youtube videos and other documents of such projects.
anon
Shajibeng | Feb 18,2016 at 02:24 PM
thanks
anon
KhairulHasanmd | Feb 28,2016 at 11:13 AM
I have bought one, and however/whatever i try, it is not working.. I've bought this before, that works with same code.. but the recent one does not work.. Has techshopbd any replace/return policy?
anon
AshrafPRO | Feb 28,2016 at 11:20 AM
What is your invoice number?
anon
KhairulHasanmd | Apr 21,2016 at 04:59 PM
#120401
anon
FAHIM_REAZA | Apr 23,2016 at 11:56 AM
Dear, we are always sincere about our customers. According to our return policy, if you have any problem for interfacing with our product, you have to inform us within 7 days from your product received date. But your order is placed on 17-January-2016, and you have made a complain on 28-February-2016. This has broken our return policy rule. Thus why, this is not possible to return this product. If you want, you can send this product to us, so that we can check this product with our “Technical Team”. Then our technical team will submit the result to you.
anon
Ranabibu | Feb 14,2017 at 04:01 PM
I have bought one today, and it is not working :-( however/whatever i try, I've
another ethernet shield that's worked perfectly but it's only showing power light nothing else.
techshopbd please help.
anon
Ranabibu | Feb 14,2017 at 05:01 PM
error code
Arduino: 1.8.1 (Windows 8), Board: "Arduino/Genuino Uno"

Sketch uses 10466 bytes (32%) of program storage space. Maximum is 32256 bytes.
Global variables use 653 bytes (31%) of dynamic memory, leaving 1395 bytes for local variables. Maximum is 2048 bytes.
C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avrdude -CC:\Program Files (x86)\Arduino\hardware\tools\avr/etc/avrdude.conf -v -patmega328p -carduino -PCOM9 -b115200 -D -Uflash:w:C:\Users\BIBU\AppData\Local\Temp\arduino_build_831578/WebServer.ino.hex:i

avrdude: Version 6.3, compiled on Dec 16 2016 at 13:33:19
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
Copyright (c) 2007-2014 Joerg Wunsch

System wide configuration file is "C:\Program Files (x86)\Arduino\hardware\tools\avr/etc/avrdude.conf"

Using Port : COM9
Using Programmer : arduino
Overriding Baud Rate : 115200
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x56
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x56
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x56
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x56
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x56
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x56
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x56
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x56
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x56
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x56

avrdude done. Thank you.

Problem uploading to board. See http://www.arduino.cc/en/Guide/Troubleshooting#upload for suggestions.

This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.
anon
A.R | Feb 14,2017 at 05:35 PM
At first please upload the code to arduino, then you connect the shield and work. If still you face problem, please inform us.
anon
Ranabibu | Feb 14,2017 at 05:55 PM
it's not working yet :-(
anon
SMARTKid | Feb 23,2017 at 07:54 PM
will it work directly with mega 1250 or do i need to redirect the connections?
anon
ASIFUZZAMANKHAN | Sep 12,2017 at 02:42 PM
I bought one a few days ago but the problem is the w5100 chip is getting intensely hot after powering it.
is it normal for this shield?
anon
A.R | Sep 12,2017 at 03:10 PM
No. This is not normal. What is your order ID?
anon
ASIFUZZAMANKHAN | Sep 12,2017 at 10:23 PM
# 141190
anon
A.R | Sep 13,2017 at 09:43 AM
Please send the product back with a copy of your invoice. WE must check that first to give you a solution.
anon
ASIFUZZAMANKHAN | Sep 14,2017 at 09:50 PM
Thanks! New one is working great


Copyright © 2012-13 Techshop Bangladesh. All rights reserved.