Arduino Weather Station Shield

Model No: ARD-00112

TK. 510.43

Availability: In stock

Quantity:

0 Ratings / 0 Reviews

Category: Arduino & Accessories

Supplier: Techshop Bangladesh

বাংলা টিউটোরিয়ালঃ Arduino Weather Station Shield কিভাবে ব্যবহার করবেন জানার জন্য এই লিংকে ক্লিক করুনঃ https://blog.techshopbd.com/arduino-weather-station-shield/

Arduino Weather Station Shield is a temperature and humidity measuring module with 4 seven-segment digits. This device plugs into an Arduino Uno board and comes with a pluggable DHT11 sensor. Just upload the Demo Code from the documents section into your Arduino Uno and enjoy the full functionality of a weather station. You can power the Arduino from a power bank (5V) / mobile charger (5V) / external DC jack (7V to 12V) and showcase your low-cost weather station.

Features:

Measures temperature and humidity using an Arduino Uno, without any wire connection.
4 seven segment digits with decimal points allow clearer annotation and precise values.
4 transistors on digit pins and 8 current limiting resistors on segment pins ensure the safety of Arduino Uno’s digital I/O pins.
Multiplexing technique saves pins and allows the user to use 7 digital I/O pins: D0(Rx), D1(Tx), D9(PWM), D10(PWM), D11, D12, D13
Stackable color-coded header for other purposes.
Comes with a pluggable DHT11 sensor but can be replaced with a more powerful DHT22.

DHT11 (comes with the package)	DHT22 (not included but compatible with this module)
Resolution: 1.0 %RH & 1°C	Resolution: 0.1 %RH & 0.1°C
Good for 20-90% humidity readings with 5% accuracy	Good for 0-100% humidity readings with 2-5% accuracy
Good for 0-50°C temperature readings ±2°C accuracy	Good for 0-50°C temperature readings ±2°C accuracy
No more than 1 Hz sampling rate (once every second)	No more than 0.5 Hz sampling rate (once every 2 seconds)

Click on the "Documents" tab to get the demo code for both DHT11 and DHT22.

Comes with a pluggable DHT11 sensor but can be replaced with a more powerful DHT22.

DHT11 (comes with the package)	DHT22 (not included but compatible with this module)
Resolution: 1.0 %RH & 1°C	Resolution: 0.1 %RH & 0.1°C
Good for 20-90% humidity readings with 5% accuracy	Good for 0-100% humidity readings with 2-5% accuracy
Good for 0-50°C temperature readings ±2°C accuracy	Good for 0-50°C temperature readings ±2°C accuracy
No more than 1 Hz sampling rate (once every second)	No more than 0.5 Hz sampling rate (once every 2 seconds)