1.54-inch-E-Ink-display-module-(Three-Color)1.jpg

1.54 inch E-Ink display module (Three Color)

Model No: DIS-00084

TK. 1499.23

TK. 1297.4

Availability: In stock

Quantity:

Category: LCD, OLED & E-Ink

Supplier: Waveshare Electronics, China

This is an E-Ink (E-Paper) display module, similar to those used in E-book readers. The Size is 1.54inch covering a 200x200 resolution, with embedded controller, communicating via SPI interface. It supports partial refresh.


Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity and high visibility under bright sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.

 

Features

  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
  • Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

 

Click here to know more about this product.

Click here to know how to use it and download necessary files.

 

We also have a Monochrome alternative of this product. Get that one here.

Specifications

  • 3 Colors: White, Black & Red
  • Operating voltage: 3.3V
  • Interface: 3-wire SPI, 4-wire SPI
  • Outline dimension: 48mm × 33mm
  • Display size: 27.6mm × 27.6mm
  • Dot pitch: 0.138 × 0.138
  • Resolution: 200 × 200
  • Display color: black, white
  • Grey level: 2
  • Refresh power: 26.4mW(typ.)
  • Standby power: <0.017mW
  • Viewing angle: >170°

Question & Answer

Total 3 questions

Q: Very cool display and works with Arduino but due to limited RAM on UNO/mini/micro text gets corrupted for multiple line You better use with Arduino Mega or RPI. Other Caveats: Require Arduino IDE latest versions (1.6+) for SPI protocol Working voltage 3.3 V and works with no power Arduino Font only size 12 and 16 given in waveshare example code 6 I/O lines required (4 SPI+ 2 Control) A bug appeared (distorted Capital 'A' ) while printing text No graphics support (except line/circle) for Arduino ........ But overall I am satisfied, I somewhat knew this is gonna happen , it happens with low ram Local/Global Stack/Heap issues ! Questioned by suntop, 22-Aug-2017

Able to get it work successfully with TM4C123 (ARM) board using Energia IDE. Since the MCU has 32 kB ram , no hiccups ! I am doing now a display retention test to see how many days the information lasts without power supply, will update when the contents get wiped off. Totally feels like typewritten character on the display, recommend for purchasing ! Thanks Techshop for bringing this stuff when I was just thinking about it ! Answered by suntop, 23-Aug-2017 00:11 AM

Thanks for sharing your experience. It will help many of us a lot. Answered by A.R, 23-Aug-2017 10:15 AM

I always try to review products and give honest feedback, if they are bad I criticize if they are good I appreciate. You know that, A.R. ! Answered by suntop, 23-Aug-2017 14:51 PM

Q: test Questioned by suntop, 22-Aug-2017

Update : Data retains on display for very long time, probably up to years. Works on Tiva TM4C123 Microcontroller Board too using Energia IDE to code. I found an example here : https://www.hackster.io/PSoC_Rocks/e-ink-display-based-static-desktop-ecalendar-764c19 Answered by suntop, 08-Sep-2017 04:21 AM

Q: Does anyone know how to draw barcode or qrcode on that display? I've used this tutorial (https://arduinobasics.blogspot.my/2015/01/e-paper-barcode-39.html) but it always draws the same barcode no matter what text I send to the &quot;drawBCode&quot; method. Questioned by maksumon, 24-May-2018

Reviews & Ratings

0 Ratings / 0 Reviews

[0]

[0]

[0]

[0]

[0]

Recently Viewed

icon

Help: 09678110110

09.00am - 08.00pm (7 days a week)

icon

Pay cash on delivery

Pay cash at your doorstep

icon

Service

All over Bangladesh

icon

Warranty and Replacement

Up to 1 Year