Automatic Water Pump Controller with Installations Kit

This is a microcontroller-based water pump control system, to ensure uninterrupted water flow in your home and office. The device uses a multifunctional push button switch, to change the mode of operation.

Any short press, the controller immediately forced the pump to Manual ON and Manual OFF sequentially. On the other hand, a long press on the multifunctional push button switch will force the controller to Automatic Mode.

On the automatic mode of operation, the controller controls the pump depending on the water level of the upper storage tank as well as the reserve tank.

No wire is in touch with the water and this is fully risk-free. Because we can realize the value of your life.

The hole water-tank status can be monitored by the LEDs indication system of the controller. Thus you will be notified during Water-LOW, Water-FULL, Motor-ON, Motor-OFF, Operation-MODE, Manual-ON, Manual-OFF, and Error!

Best automatic water pump controller

Until now, any other water pump controller detects the water level by direct small current flowing in the water. Which is very risky. If any much current is drawn or the insulation failure occurs in the ac-to-dc transformer, thus live current passing through the water may be a danger to all of you.

So we have developed a controller, which uses no current flowing through the water, even no direct touching contactor.

Package Include:

1. Automatic Water Pump Controller X1

2. Float switch water Level Controller X1

3. Magnetic Contactor (LS GMS - 22) X1

4. Cable Tie 150mm X1 Packet